Home / Shop
V20-OB-A3-W-W-M2-L
- Description
- Specifications
Applications
- Detecting objects
- Measurement
- Counting
255 jobs with 255 detectors each
- Alignment: X/Y and orientation
- Pattern matching/contours: Teach-in and detection of patterns and contours
- Caliper: Distance between edges
- BLOB, gray threshold, brightness: Evaluation of brightness
- Contrast: Evaluation of the contrast
| Image chip type | Monochrome |
| Light source | LED |
| Light color | White |
| Wavelength [°K] | 4,500 |
| LED risk category [RG] | 1 |
| Explanation of risk category | Acc. to EN 62471 |
| Resolution | HDV2 |
| Number of pixels (H x V) [px] | 1440 x 1080 |
| Imaging chip technology | CMOS |
| Sensor size ["] | 1/2.9 |
| Pixel size [µm] | 3.45 |
| Field of view type | Wide |
| Focal length [mm] | 6.5 |
| Opening angle [°] | 46.0 |
| Min. field of view (X x Y) [mm] | 6 x 5 |
| Aperture number | 2.8 |
| Depth of field | Standard |
| Focus drive | Motorized |
| Target laser | Laser red (655 nm) |
| Laser class | 1 (IEC 60825-1) |
| Network protocol | TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port |
| Max. number of jobs | 255 |
| Max. number of detectors | 255 |
| Alignment | Contour comparison, Pattern matching, Edge detection |
| Available detectors | Pattern matching, Contour, Contour check, BLOB, Brightness, Contrast, Grayscale, Caliper |
| Result processing | Numbers |
| Pre-processing | Arrangement, Filter |
| Calibration | Board (measurement), Scaling (measurement) |
| Robotic functions | - |
| Additional functions | Archiving, Image transmission, individual overlays, Multiple image acquisition, Multiple detection for contour and pattern matching detector, Job checksum |
| Hardware | VISOR® |
| Typical current draw [mA] | 350 |
| Type of voltage source | The device must be supplied by a "Class 2" power supply unit. |
| Readiness delay [ms] | ≤ 16,000 |
| Reverse polarity protection | Yes |
| Overvoltage protection | No |
| Residual ripple [%] | ≤ 5 Vss, level 3 |
| Explanation of residual ripple | EN 61000-4-17 |
| Polarity | PNP/NPN |
| Short circuit protection | Yes |
| Input threshold (High) | > UB-1V |
| Input threshold (Low) | < 3V |
| Input resistance [kΩ] | > 20 |
| Max. output current [mA] | 50 |
| Explanation of max. output current | max. 100 mA on pin 12 |
| Inductive loads | Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH |
| Max. output current (total) [mA] | 200 |
| Ethernet transmission rate [Mbit/s] | 100 |
| Number of switchable IOs | 6 |
| Number of outputs | 2 |
| Number of inputs | 2 |
| Encoder functions | Yes |
| Height [mm] | 85.0 |
| Length [mm] | 45.0 |
| Width [mm] | 45.0 |
| Weight [g] | ~ 220 |
| Front panel material | PMMA |
| Housing material | Aluminum (cast) |
| Connection name | Supply |
| - Number of pins | 12 |
| - Coding | A |
| - Thread | M12x1 |
| - Material | Metal |
| - Type | Plug |
| Connection name | LAN |
| - Number of pins | 4 |
| - Coding | D |
| - Thread | M12x1 |
| - Material | Metal |
| - Type | Socket |
| Explanation of ambient temperature: storage | < 95 % humidity, non-condensing |
| Protection class | IP 65, IP 67 |
| Explanation of protection class | For C-mount devices, only in combination with protective tube |
| Vibration and shock resistance | EN 60068-2-6, EN 60068-2-27 |
